Transimpedance Amplifiers - Communications

image-from-the-document-manager

MACOM's optoelectronics products also includes a wide range of transimpedance amplifiers (TIA) for line and client side 10G, 40G and 100G fiber optic receivers. Our portfolio includes linear TIAs for long haul coherent receivers and limiting TIAs for shorter range NRZ based receivers. These parts feature market leading gain, noise performance and power dissipation. They are available in die form for integration with photo-detectors in an optical sub-assembly. 

Recent Searches
Recently Viewed Products
  • No Recent Parts found!

Parametric Search

Part Number Ordering Short Description Max Data Rate (Gbps) Differential Transimpedance Gain (kOhms) Small Signal Bandwidth (GHz) Input Overload Current (mA) Input Referred Noise (IRN, RMS nA) (nA) Optical sensitivity with PIN (dBm) Optical Sensitivity with APD (dBm) ADS & SPICE Model Info Application Notes Benefits Brightcove Video Burst Mode Compatible Parts Content Data Sheet Package Outline Datasheet Device Firmware ESD EVM GUI Software EVM User Guides EVM/Reference Design Guides Embedded CDR Features LF Cutoff Frequency (KHz) Last Time Buys Lead Finish MSL Marking Model Data (Sparameters) Number of Channels Outline Drawings Output Swing Voltage (mV) PCNs Package Size Package Type Power Consumption (Watts) Product Briefs Product Bulletins Product Image Qualification Reports Reference Design/Schematic RoHS/IPC Report Supply Voltage (V) Whitepaper
 
 
 
 
 
 
 
 
 
 
 
MATA-03802A Inquire Dual Channel Linear TIA
32 5 25 2 MATA-03802A.pdf
Dual Channel Linear TIA’s with AGC
Includes Linear Peak Detector Output
Low Power Consumption: 350mW (Typ)/channel
Adjustable Bandwidth: 17-25 GHz (Typ.)
Transimpedance Gain: 200O to 5KO
Data Rate: NRZ Data Rate up to 32Gbps
M02035 Inquire Burst Mode OLT TIA
2.5 3.6 1.7 1.5 250 -33 02035-DSH-001-B.pdf
M02035-13_-23_-33.pdf
M02035_11_21_31.pdf
Typical continuous mode -31.5 dBm sensitivity, -6 dBm saturation at 2.5 Gbps when used with a 8 A/W APD (Cpd = 0.3 pF, BER 10-10)
Available in die form only
Standard +3.3 Volt supply
Differential output
Fabricated in standard CMOS
10 ns typical burst settling time
Burst to burst dynamic range of 25 dB
Typical single-ended transimpedance: 0.8 kO
M02036 Inquire Burst Mode GPON OLT TIA
1.3 3.8 0.8 2.5 170 -35 02036-DSH-001-E.pdf
M02036_12_22_32.pdf
M02036_13_23_33.pdf
Typical -33.5 dBm sensitivity, -6 dBm saturation at 1.25 Gbps when used with a 9 A/W APD (Cpd = 0.3 pF, BER 10-10)
Standard +3.3 Volt supply
Differential output
Fabricated in standard CMOS
10 ns typical burst settling time
Burst to burst dynamic range of 25 dB
Burst average receiver power monitor output
Typical single-ended transimpedance: 1 kO
Available in die form only
M02029 Inquire CMOS TIA with AGC
3.1 10 1.85 4 130 -35 Single +3.3 V supply
M02029-13.pdf
Typical -35 dBm Sensitivity with an APD, 130 nARMS Noise
Internal or external bias for photodiode
Bonding flexibility
4 mApp Overload input current
6.2kO Differential Transimpedance
RSSI (IMON) supports APD Imon monitoring
No internal ROSA VCC filter capacitor required for typical operation
No filter (PINK) capacitor required
Data rates from 100 Mbps 8b/10b to 3.125 Gbps
MATA-003806 Inquire 32 Gbps Dual Channel Linear TIA for DP-QPSK Advanced Receivers
32 10000 25 3 17 MATA-03806.pdf
MABT-011000.png
M02129 Inquire 8.5 Gbps Transimpedance Amplifier with AGC
10.3 2 7.8 3 1200 -18 -25 C
02129-DSH-001-D.pdf
No
Typical -17.5 dBm OMA sensitivity at 8.5 Gbps and -21.5 dBm OMA sensitivity at 1.25 Gbps
Single +3.3 V supply
Internal or external bias for photodiode
Photodiode current monitor
2 mAPP overload input current
4.5kO differential transimpedance
AGC provides dynamic range of 23 dB
No filter (PINK) capacitor required
Data rates to 8.5 Gbps with rate selectable option at 1 Gbps
30 1
200 1.242x0.932mm
Dice
0.115 MACOM_general.png
3.3
M02139 Inquire 1 Gbps to 10.3 Gbps TIA with AGC and Rate Select
10.3 2.5 7.5 2.5 1500 -20 -27 C
02139-DSH-001-D.pdf
No
Typical -19 dBm average sensitivity @ 10.3 Gbps
Available in die form only
Single +3.3 V supply
Internal or external bias for photodiode
Photodiode current monitor
2 mAPP overload input current
3.8 kO differential transimpedance
AGC provides dynamic range of 23 dB
No filter (PINK) capacitor required
Low rate mode for 1 Gbps/1.25 Gbps operation
30 1
140 1.242x0.932mm
Dice
0.142 MACOM_general.png
3.3
M02026 Inquire 1.2 112 1.05 4 120 -31 C
Inquire No
Typical -33.3 dBm sensitivity
Same pad layout and die size as M02011/13/14/15/16/20/24
Single +3.3V supply
Internal or external bias for photodiode
Photodiode current monitor
4 mAPP overload input current
120 kO differential transimpedance
AGC provides dynamic range of 40 dB
No filter (PINK) capacitor required
Data rates to 1.25 Gbps
35 1
210 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.13 MACOM_general.png
M02026-32_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02038 Inquire 1.25 Gbps Burst Mode CMOS TIA
1.2 8.5 0.85 4 350 -34 B
02038-DSH-001.pdf
M02038-13_-23_-33.pdf
No
Typical -34 dBm sensitivity, -6 dBm saturation at 1.25 Gbps when used with a 8 A/W APD (CPD = 0.2 pF, BER 10-12)
Available in die form only
Standard +3.3 volt supply
Differential output
Fabricated in standard CMOS
200 ns typical burst settling time
Burst-to-burst dynamic range of >25 dB
Burst average receiver power monitor output
Typical differential transimpedance of 8 kO
3000 1
275 1.090x0.88mm
Dice
0.082 MACOM_general.png
3.3
M02013 Inquire 3.2 Gbps AGC Pre-Amplifier
3.1 10 2.4 4 475 -23 C
M02013.pdf
No
Typical -23 dBm sensitivity, +3 dBm saturation at 3.2 Gbps (-24 dBm at 2.5 Gbps) when used with 0.9 A/W InGaAs PINs. (Cpd = 0.5 pF BER 10-10)
Minimum 2.0 Ghz bandwidth and multi-pole roll-off for operation to 3.125Gbps
AGC provides dynamic range of more than 25 dBm
Available as die only
+3.3 Volt supply
50O differential output
Monitor output
Low-cost CMOS
Typical differential transimpedance: 10 kO
Same pad layout as the M02011/4/5/6
50 1
140 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
02013-PCN-001-A.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.14 02013-BRF-001-A.pdf
MACOM_general.png
620978A.zip
MH07-X710_Rev_00.pdf
MH07-X700_Rev_00.pdf
m02013-3a_ipc-1752-1_v1.02.pdf
3.3 02XXX-WTP-001-A.pdf
M02024 Inquire 2.5 Gbps AGC Ultra-High-Sensitivity Pre-Amplifier
2.5 51 1.27 4 180 -28 C
02024-DSH-001-E.pdf
No
-29 dBm sensitivity
Same pad layout and die size as M02011/13/14/15/16
Single +3.3V supply
Internal or external bias for photodiode
Photodiode current monitor
4 mAPP overload input current
+6 dBm Input overload
AGC provides dynamic range of 35 dB
Integrated filter, eliminates need for a capacitor on the photodiode cathode
Data rates to 2.5 Gbps
40 1
110 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.13 M02024-BRF-001-A.pdf
MACOM_general.png
M02024-12_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02028 Inquire 1.2 24 1.3 4 80 -31 C
Inquire No
Typical -31.0 dBm sensitivity with CPD of 0.75 pF
Single +3.3 V supply
Internal or external bias for photodiode
Bonding flexibility (M02028-12/-22/-32)
On-die temperature sensor (M02028-11/-21/-31)
4 mApp overload input current
20 kO differential transimpedance
Two RSSI (IMON) options to support APD and PIN Diode PD
No internal ROSA VCC filter capacitor required for typical operation
No filter (PINK) capacitor required
Data rates from 100 Mbps 8b/10b to 1.25 Gbps
20 1
50 1.090x0.88mm
Dice
0.14 MACOM_general.png
M02028_IPC-1752-2_v11a_TSMC.pdf
3.3
M02020 Inquire 4 Gbps CMOS Transimpedance Amplifier with AGC
4.3 3.6 3.4 4 550 -23 -29 C
M02020-12.pdf
No
Typical -23 dBm Sensitivity
Same pad layout and die size as M02011/13/14/15/16/24/26
Single +3.3V supply
Internal or external bias for photodiode
Photodiode current monitor
4 mAPP overload input current
3 kO differential transimpedance
AGC provides dynamic range of 29 dB
No filter (PINK) capacitor required
Data rates to 4.25 Gbps
17 1
140 020xx-PCN-006-A.pdf
CN-042811 020XX Pack and Ship PCN.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.145 MACOM_general.png
M02020-XX_IPC-1752-1_v11a_TSMC-SSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02015 Inquire 2.5 Gbps AGC Pre-Amplifier
2.5 9 1.4 4 290 -26 C
M02015.pdf
No
Typical -26 dBm sensitivity, > +6 dBm saturation at 2.5 Gbps
Monitor Output
Operates on a single 3.3V supply
Differential 100O output impedance
Maximum jitter of 70 ps p-p
Typical differential transimpedance: 9kO
Overload of 6ma p-p
Input-referred noise of 280na (typical)
Bandwidth 1.8 Ghz (typical)
AGC provides dynamic range of more than 32 dB
35 1
140 020xx-PCN-006-A.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.096 02015-BRF-001-A.pdf
MACOM_general.png
M02015-11_IPC-1752-1_v11a_TSMC.pdf
M02015-XX_IPC-1752-1_v11a_TSMC-SSMC.pdf
M02015-21_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02025 Inquire 3.2 20 1.45 4 120 -30 C
M02025-18.pdf
No
Typical -30.0 dBm sensitivity, 120 nARMS noise*
Single +3.3 V supply
Internal or external bias for photodiode
Bonding flexibility (M02025-15/-25/-35)
On-die temperature sensor (M02025-14/-24/-34)
4 mApp overload input current
20 kO differential transimpedance
Two RSSI (IMON) options to support APD and PIN Diode PD
No internal ROSA VCC filter capacitor required for typical operation
No filter (PINK) capacitor required
Data rates from 100 Mbps 8b/10b to 3.125 Gbps
* with 0.35 pF CPD, 135 nARMS with 0.5 pF CPD
20 1
50 1.090x0.88mm
Dice
0.14 MACOM_general.png
M02025_IPC-1752-2_v11a_TSMC.pdf
M02025-XX_IPC-1752-1_v11a_TSMC-F6.pdf
3.3
M02016 Inquire 1.25 Gbps AGC Pre-Amplifier
1.3 24 1 4 130 -29 C
M02016.pdf
No
Typical -29dBm sensitivity, +6 dBm saturation at 1.25 Gbps when used with 0.9 A/W InGaAs PIN. (Cpd = 0.5pF, BER 10-10)
Same pad layout and die size as M02011/3/4/5
Internal or external bias for photodiode
AGC provides dynamic range of 35 dBm
Monitor Output
Available in die form only
PIN or APD sensor
Standard +3.3 Volt supply
Differential output
Fabricated in standard CMOS
Typical differential transimpedance: 24 kO
Minimum 800 Mhz bandwidth and multi-pole roll-off provide operation to 1.25Gbps
70 1
140 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
02016-PCN-001-A.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.096 02016-BRF-001-A.pdf
MACOM_general.png
620978A.zip
MH07-X690_Rev_00.pdf
MH07-X680_Rev_00.pdf
m02016--xx_ipc-1752-1_v1-02.pdf
M02016-XX_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02014 Inquire transimpedance amplifier (TIA) with automatic gain control
2.5 11 1.4 4 250 -26.5 C
02014-dsh-001-d.pdf
No
Typical -27 dBm sensitivity, > +6 dBm saturation at 2.5 Gbps
AGC provides dynamic range of more than 32 dB
Monitor Output
Operates on a single 3.3V supply
Differential 100O output impedance
Maximum jitter of 60 ps p-p
Typical differential transimpedance: 13kO
Overload of 6ma p-p
Input-referred noise of 253na (typical)
Bandwidth 2.2 Ghz (typical)
35 1
140 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.125 02014-BRF-001-A.pdf
MACOM_general.png
M02014-11_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02011 Inquire 622 Mbps AGC Pre-Amplifier
0.6 65 0.6 4 50 -34 C
M02011.pdf
No
Typical -34 dBm sensitivity, > +6 dBm saturation at 622 Mbps
AGC provides dynamic range of more than 40 dB
Monitor Output
Operates on a single 3.3V supply
Differential 100O output impedance
Maximum jitter of 100 ps p-p
Typical differential transimpedance: 66kO
Overload of 8ma p-p
Input-referred noise of 56na (typical)
Bandwidth 600 Mhz (typical)
13 1
140 020xx-PCN-006-A.pdf
020xx-PCN-007-A.pdf
1.090x0.88mm
Dice
0.095 02011-BRF-001-A.pdf
MACOM_general.png
M02011--XX_IPC-1752-1_v1-02.pdf
3.3 02XXX-WTP-001-A.pdf
M02006 Inquire 155 Mbps AGC Pre-Amplifier
0.2 260 0.1 2.2 8 -39 C
M02006.pdf
No
Fabricated in standard high-volume CMOS process
Available as die
Pin-compatible with other pre-amplifiers
Minimum -39 dBm sensitivity,+3 dBm saturation at 155 Mbps when used with 0.9 A/W InGaAs PINs (BER 10E-10)
Only requires one capacitor for supply decoupling
Differential output
150 kohms transimpedance
Operates with standard +5 V or ECL supplies
Priced to suit both high-volume datacom and telecom applications
30 1
300 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
020xx-PCN-007-A.pdf
1.010x0.960mm
Dice
0.15 02006-BRF-001-A.pdf
MACOM_general.png
M02006--XX_IPC-1752-1_v1-02.pdf
5 02XXX-WTP-001-A.pdf
M02009 Inquire a low-noise transimpedance amplifier with AGC
0.6 36 0.4 4.5 70 -32 C
02009-DSH-001-D.pdf
No
Low-cost IC, fabricated in advanced sub-micron pure CMOS process
Monitor O/P gives linear indication of received optical power
Power dissipation of 130 mW at 3.3 V supply typical
33 dB power-supply noise rejection
AGC gives continuous operation to +3 dBm
Minimum 415 MHz bandwidth and multi-pole roll-off allows a wide range of operation up to 622 Mbps
Available as die only
Differential output
Typical differential transimpedance at low signal levels of 32 k ohms
Receiver sensitivity better than -32 dBm at 622 Mbps
40 02009-LTB-001-A.pdf
1
400 020xx-PCN-007-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
1.020x0.890mm
Dice
0.1 02009-BRF-001-A.pdf
MACOM_general.png
M02009X-WP-T_IPC-1752-2_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02007 Inquire a low-noise transimpedance amplifier with AGC
0.2 62 0.14 2.8 8 -39 C
02007-DSH-002-E.pdf
No
Low-cost IC, fabricated in advanced sub-micron pure CMOS process
Power dissipation of 65mW at +3.3 V supply
>35 dB power supply noise rejection
AGC gives continuous operation to +3 dBm
Receiver sensitivity better than -39 dBm at 300 Mbps when integrated into a module with suitable photodiode and post-amplifier
Available as die only
Differential output
Typical differential gain of 60 kohms at low signal levels
140 MHz bandwidth allows wide range of operation; suitable for 100, 125, 155 and 200 Mbps
35 02007-LTB-002-A.pdf
1
300 020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf
020xx-PCN-007-A.pdf
1.010x0.960mm
Dice
0.07 02007-BRF-001-A.pdf
02007-PBD-001-A.pdf
MACOM_general.png
M02007--XX_IPC-1752-1_v1-02.pdf
M02007-XX_IPC-1752-1_v11a_TSMC.pdf
3.3 02XXX-WTP-001-A.pdf
M02027 Inquire 100 Mbps to 3.1 Gbps Multirate CMOS TIA with AGC
3.1 42 1.5 4 91 M02027.pdf
M02027_PBD_1.pdf
Macom gen.png
M03101 Inquire 28 Gbps Quad Channel Transimpedance Amplifier (TIA)
28 21 Inquire 500 µm channel spacing
Single +3.3 V supply
No filter (PINK) capacitor required
Data rates from 10.3 to 28 Gbps
Typical 21 GHz bandwidth in high rate mode
Typical 1.4 µA noise in high rate mode
Bare Die
M03102 Inquire 28 Gbps Quad Channel Transimpedance Amplifier (TIA)
28 21 Inquire 750 µm channel spacing
Single +3.3 V supply
No filter (PINK) capacitor required
Data rates from 10.3 to 28 Gbps
Typical 21 GHz bandwidth in high rate mode
Typical 1.4 µA noise in high rate mode
Bare Die
M03002 Inquire 28 Gbps Transimpedance Amplifier (TIA)
28 21 M03002.pdf
Typical 1.4 µA noise in high rate mode
Single +3.3 V supply
No filter (PINK) capacitor required
Data rates from 10.3 to 28 Gbps
Typical 21 GHz bandwidth in high rate mode
Bare Die
MATA-02135 Inquire 8.5/10/11.3 Gbps Limiting TIA
11.3 3.4 8.2 3 850 -21 -27 MATA-02135A.pdf
Die
Die
Macom gen.png
M03100 Inquire 28 Gbps Quad Channel Transimpedance Amplifier (TIA)
28 2.9 22 2.8 1 -17 Inquire Waffle Pack
MACOM Gen.png