Product Detail

M02050
3.2 Gbps, 3.3 or 5V Post-Amplifier
The M02049/50 are integrated high-gain limiting amplifiers. Featuring CML outputs, the M02049 is usable in applications to 4.3 Gbps while the M2050 features PECL outputs and is intended for use in applications to 2.5 Gbps. Full output swing is achieved even at minimum input sensitivity. The M02049/50 can operate with a 3.3V or 5V supply. Rate select is supported for SFP applications and/or to achieve optimum sensitivity at data rates = 1.25 Gbps. When rate select is high, optimum sensitivity is achieved at 2.5 Gbps and operation up to 4.3 Gbps (M02049) is possible with reduced sensitivity. The M02049/50 also includes two analog RSSI outputs proportional to either the average or peak-to-peak input signal and a programmable signal-level detector allowing the user to set thresholds at which the logic outputs are enabled.
Features
  • Operates with a 3.3 or 5V supply
  • -40° to +85°C operating temperature range
  • Low power (< 80 mW at 3.3V, CML version)
  • On-chip DC offset cancellation circuit
  • Peak-to-peak receive power monitor output (RSSI PP)
  • Average receive power monitor output (RSSI AVG)
  • Rate selection for = 1.25 Gbps operation
  • PECL outputs
  • 4 mV input sensitivity at 2.5 Gbps
Applications
  • Enterprise Solutions
  • Optical Networking
Specifications
  • Power Consumption: 0.18 Watts
  • Max Data Rate: 2.5 Gbps
  • Input Sensitivity (mVpp): 3.5 mV
  • Output Swing Voltage: 800 mV
  • Input Overload Swing: 1,600 mV
Part Number Package MACOM Richardson RFPD DigiKey Mouser
M02050G-14
2.5GBS POST AMPLIFIER, PECL OUTPUT
3X3MM QFN-16LD Inquire
M02050G-15
2.5GBS POST AMPLIFIER, PECL OUTPUT
3X3MM QFN-16LD
In Stock: 702
Buy

Favorite Parts

Log in to MyMACOM to save your favorite parts.

People Also Viewed

Recently Viewed

  • No Recent Parts found!

Technical Resources

Resources

Support

Recent Searches