MACOM's Preet Virk discusses trends in optical networking including changes in the data center and the move to 5G at OFC 2018!
Multi-Channel, Low Power Reclocker
A live demonstration of our multi-channel, low power reclocker for SDI applications (from the 2012 NAB Show).
Optical Transport Solutions
Discussing the advantages of optical transport for the video and broadcast industry (from the 2012 NAB Show).
MAAM-011101 Ultra Small, Broad Band, General Purpose Amplifier
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new ultra small, broad band General Purpose Amplifier. This device operates from 4 to 20 GHz, has typical Gain of 16 dB with +18 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.
MACOM's ultra low power EML driver
Listen to expert Ray Moroney, Product Manager for Optoelectronics, talk about MACOM's ultra low power EML driver for 100G ethernet applications. This quad channel driver in a 10x10mm surface mount package is the lowest power, smallest form factor solution for CFP2 and CFP4 modules.
MAAM-011109 Ultra Wide Band Amplifier:
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new MAAM-011109 ultra wide band amplifier. This device operates from 10 MHz to 40 GHz, is fully matched to 50 ohms, provides approximately 12 dB of Gain and is packaged in a convenient 5mm by 5mm laminate package.
MACOM's quad channel modulator driver for 100G metro applications
Listen to expert Ray Moroney, Product Manager for Optoelectronics, talk about MACOM's quad channel modulator driver for 100G metro applications. This driver in a 13x19mm surface mount package has 4 channels with differential inputs and single-ended outputs and is a low power solution for coherent CFP and CFP2 modules.
MACOM's 5.2-5.9 GHz 8W Power Amplifier
Listen to expert Paul Beasly, Product Manager for Radar Products, talk about MACOM's 5.2-5.9 GHz 8W Power Amplifier. This PQFN packaged GaAs power amplifier offers high gain and power with cost effective SMT assembly techniques.
Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talk about MACOM's product MASW-011041 ideally suited for packaged (9mm) multi-throw switch applications from 30MHz to 1.5GHz with up to 200Watts of power handling.
Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talks about MACOM's product MASW-011040 ideally suited for packaged (9mm) multi-throw switch applications from 30MHz to 1.5GHz with up to 200Watts of power handling
MACOM's Shunt PIN diode series
Listen to expert Paul Wade, Product Manager for Diode Standard Products, talk about MACOM's Shunt PIN diode series (MADP-011027, MADP-011028 & MADP-011029). These plastic packaged devices (1.5 X 1.2mm DFN) are ideally suited for switch applications operating from 50MHz to 12GHz with power handling up to and beyond 100W CW incident power.
AlGaAs Multi-Throw Switch Series Listen to expert Paul Wade, Product Manager for Diode Standard Products, talk about MACOM's AlGaAs PIN diode switch series (MA4AGSW series). These chip scale devices are ideally suited for switch applications operating from 50MHz up to 70GHz. These are offered in various configurations from SPST to SP8T.
MACOM's 2.0-6.0 GHz 12 W Power Amplifier
Listen to expert Paul Beasly, Product Manager for Radar Products, talk about MACOM's 2.0-6.0 GHz 12 W Power Amplifier. The MAAP-010169 boasts excellent return loss performance, high gain and broad frequency operation, making the device an ideal high power wide band solution.
MACOM's UpConverter, MAUC-010506
Learn more about the Industry's Leading Upconverter for 18 and 23 GHz Point-to-Point Wireless Applications. Watch Product Manager David Richardson, speak about the device that boasts the industry's leading LO suppression which eliminates the customers' need for a Tx Filter.
Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talk about MACOM's product MASW-011036 ideally suited for Ka-Band TR Switch applications for commercial and military applications requiring up to 16Watts of power handling.
MAAM-011100 Ultra Small, Broad Band, Variable Gain Amplifier:
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, talk about MACOM's new MAAM-011100 variable gain amplifier. This device operates from 0.4GHz to 20 GHz, has a gain control range of 30 dB with +13 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.
MACOM's MADP-011037-13900T - Series PIN diode
Listen to expert Paul Wade, Product Manager for Didoe Standard Products, talk about MACOM's Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
MACOM Emmy® Snapshot: SDI Video Crosspoints: MACOM has been honored with a National Academy of Television Arts & Sciences’ (NATAS) 67th Annual Technology and Engineering Emmy® Award for its “Development of Enabling Technology for High Density Video Switching and Routing Solutions.”
MACOM's MADP-011037 - Series PIN Diode Technical Video #2
Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about Technical Design Benefits of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
MACOM's MADP-011037 Series Pin Diode Technical Video #1
Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about key features of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
2 x LO Nulling Testing from MACOM
Watch Principal Engineer Emmanuelle Convert demonstrate the testing of MAUC-010506 for 2x LO suppression.
MACOM's MAAM-011117 CPE Amplifier
Listen to Graham Board, Wired Broadband Product Line Manager, discuss MACOM's latest high performance CPE Amplifier. The MAAM-011117 is designed as a universal front-end amplifier with a powered down feature for CPE "Green" stand-by operation.
MACOM's Shunt Diode family, Technical Session #1
Listen to our expert Joe Bukowski on MACOM's Shunt Diode Family.
MACOM's S-Band Switch Limiter
Listen to expert Paul Beasly, Product Manager for Radar Products, talk about MACOM's S-Band Switch Limiter. This packaged device offers a high level of integration and high power handling making it ideally suited to Radar applications.
Customer Snapshot: Ensemble Designs
Cindy Zuelsdorf of Ensemble Designs introduces the award-winning 9432 Avenue Router at the 2011 NAB Show.
MACOM Highlights from the 2014 NAB Show
MACOM's Hasnain Bajwa offers an overview of our new product announcements from the show and highlights our technology advancements for 4K and 8K broadcast video transport.
Live at OFC - Lowest Power Transmit Solution for 100GbE LR4
Ray Moroney, MACOM's product line manager for Optoelectronics, describes MACOM's latest EML driver solution for 100 gigabit Ethernet applications in CFP2 and CFP4 form factors for distances up to 10km.
Live at OFC - MACOM's "Lighting the way to 100G and Beyond"
Vivek Rajgarhia, MACOM's Director of Strategy describes MACOM's growth strategy and position in 100G Optoelectronics.
Live at OFC - MACOM's latest signal conditioning advances for 100G
MACOM's Marek Tlalka reviews our latest signal conditioning advances for 100G applications at OFC 2014. Among MACOM's live demonstrations at the show were low-power clock and data recovery (CDR) solutions and high data rate crosspoint switches and signal conditioners.
Live at OFC - MACOM's Latest Solutions for ONU/OLT Applications
MACOM's Angus Lai reviews our latest advances for 100G at OFC 2014. Our industry-leading solutions for ONU/OLT applications are featured in this video.
Demonstration of Transimpedence Gain
Watch MACOM Test Engineer Declan Healy demonstrate our FTTx amplifier and measure Transimpedence Gain from the optical input to the RF output of the amplifier
MACOM FTTx Amplifiers
Watch MACOM Test Engineer Declan Healy show you how to measure CSO/CTB and RF output power for our new FTTx Amplifiers.
DOCSIS 3.1 Compliant Passive Components
Listen to expert Graham Board--Director of Carrier Networks group at MACOM- discuss the industry's broadest portfolio of Docsis 3.1 compliant passive components for CATV and broadband cable systems
DOCSIS 3.1 Compliant CATV Amplifiers
Listen to expert Graham Board--Director of Carrier Networks group- discuss MACOM's portfolio of Docsis 3.1 compliant cable amplifiers for CATV and broadband infrastructure access equipment
Switches: MASW-011040 & MASW-011041
Listen to Paul Wade, Product Manager at MACOM, discuss two fully integrated switches- MASW-011040 & MASW-011041
New 4 W Ka-Band Power Amplifier
Listen to Paul Beasly, Product Manager at MACOM, as he discusses high linearity power amplifier- MAAP-011139
7 W Pulsed High Power Amplifier
Listen to Paul Beasly, Product Manager at MACOM, as he discusses the MAAP-011022; high power amplifier designed for civil air traffic control and weather radar applications
100G Metro Market Overview
Listen to Expert Vivek Rajgarhia, Director of Strategy for HPA at MACOM, discuss 100G in the Metro.
MACOM's MAXP-37161A is a highly integrated, low power, fully non-blocking 16 channel 28 Gbps crosspoint switch, targeted for 100G Ethernet, EDR InfiniBand and OTN applications
The MAAV-011013 is a voltage cariable attenuator that operates under a 5 to 45 GHz Frequency Range. Optimized for Wiresless Infrastructure and Wireless Backhaul applications.
MACOM continues to build upon our legacy of enabling rugged space applications with our growing portfolio of high-reliability semiconductor products.
MACOM's wire-speed Ethernet MACsex PHY products offer highly scalable and cost-effective encryption solutions to address the data security issues in carrier, data center and cloud networks.
MACOM has the industry's most extensive portfolio for 100G, enabling your optical designs targeting the data centers of today and tomorrow.
MACOM is the leading provider for FTTx/PON, with over 300 million components shipped into PON. Our broad portfolio of high-performance components forms the leading solution for FTTx/PON applications.
MACOM's extensive offerings for SFP+ and SFP28 short and long reach include leading DML lasers, best in class TIAs, highly integrated driver/amplifier ICS, forming the world's leading solution for Fronthaul/Backhaul.
MACOM has the industry's most extensive portfolio for 100G and 400G enabling your optical designs targeting the data centers of today and tomorrow.
The MAGe-102425-300 is a 300 W GaN Power Transistor based on MACOM's Gen4 GaN technology suited for a wide range of commerical RF applications.
MACOM's Vivek Rajgarthia, SVP and GM, speaks with Verizon on telecommunications and the role of photonics, as well as advances in the semiconductor industry.
MAAP-011199 is a GaAs pHEMT Power Amplifier. Designed for Imaging, Sensors and Communication Applications for customers who need Solid Power and High Gain Across the Entire 80 - 100 Ghz Frequency Band.
MAAM-011229 is a Broadband Low Noise Amplifier (LNA), designed for MILCOM and Public Service Radio applications for customers who need flat gain, low noise and adjustable voltage and current.
The MAAM-011206 is a Broadband Darlington Amplifier, designed for Communication Networks and Test and Measurement for real estate constrained customers who need industry leading bandwidth, power and ease of use.
Family of 75 Ω Amplifiers covering 5 - 1218 MHz. Designed for Wired Broadband Applications for customers who need high gain, superior linearity and low noise figure.
The MASW-011087 is a high power, symmetrical SP4T switch. This broadband, reflective switch was developed for Ka-Band applications that require up to 38 dBm (6.3 W) power handling while maintaining low insertion loss and high isolation.
The MASW-011094 is a broadband, high linearity, high power SPDT switch with 50 Ω terminated RF ports. Developed for Ka-Band applications that require up to 40 Watts CW power handling at an enviornmental temperature of +85°C.
The MADR-009150 is a 20 to 50 V Driver for high power PIN diode switches. Designed to work with MACOM's high power and high voltage PIN diode switches with complimentary outputs which can provide up to 200 mA bias current to a SPDT PIN diode.
The MADP-009989 diode acts as a passive protected (limiter) for the MRI receiver. Designed to protect MRI receivers from high RF energy fields including long RF pulses and RF spike pulses present in most MRI machines.
In this intriguing demonstration video, Manuel Romero of MACOM shows off his cooking skills using a GaN powered Microwave at IMS2016 in San Francisco, California.
Mark Murphy, David Ryan, and Paul Wilson discuss MACOM's multi-faceted strategy for 5G, during a conversation with Microwave Journal at Mobile World Congress 2018.
MACOM's Preet Virk discusses trends in optical networking including changes in the data center and the move to 5G at OFC 2018!
MACOM is increasing bandwidth density in optical networks, decreasing size/power consumption and increasing port density of optical interconnects.
Dr. Doug Carlson, Senior Vice President and General Manager, RF & Microwave on how MACOM and STMicroelectronics are bringing GaN on Silicon to Mainstream RF Markets and Applications
MACOM's Lightwave Antenna technologies (Patented GaN-on-Silicon, Proprietary Switch, and Coherent Beamforming) enable precision and affordability in 5G Wireless and Radar applications, to include Weather and Air Traffic Control.
In depth Microwave Journal interview with VP and Chief Architech, Tony Fischetti, discussing phased array antenna technology.
Simplify and accelerate RF energy development with this development tool. Combining the benefits of MACOM’s GaN on Si power transistors with intuitive, flexible software and signal control capabilities, MACOM’s RF Energy Toolkit takes the guesswork out of the RF power source design and enables faster time to market. Demonstrated at IMS 2018.
Tony Fischetti breifly discusses MACOM's unique approach to phased array antenna technology for 5G and other applications at IMS 2018.
Global & Homeland Defense and 5G
MACOM Non-Linear- Transmission-Line (NLTL) Comb Generator Family
MLPNC-7102S1 & MLPNC-7103S1
Learn why Cloud computing-based C-Ran Network architectures are pivotal in the evolution from 4G to 5G, and how MACOM’s technology advantages are solving the current cost structure, supply chain, quality of service, and performance constraint challenges.
Learn how MACOM's serial 100 Gbps solution achieves lowest cost, lowest power, highest density, and is compatible with 400 Gbps and next-generation switch ASICs.
Light Reading's Simon Stanley speaks with Marek Tlalka, Senior Director of Marketing, High Performance Analog at MACOM, about the evolution of 100 Gbps, 200 Gbps and 400 Gbps within the Data Center.