FTTx Amplifiers

FTTx Amplifiers

MACOM’s FTTx amplifiers are designed for PON, RFoG and SFU receiver equipment and are offered in small, plastic QFN packages with integrated amplifier and attenuator functions. All parts cover the full 45 to 1000MHz CATV band. 5v and 12v solutions are offered with power consumption of ≤ 1.5Watts. MACOM’s FTTx amplifiers are characterized with industry standard photodiodes, covering optical input ranges from -12 to +3dBm and each sample EVK comes complete with a photodiode and APC connector.       

Recent Searches
Recently Viewed Products
  • No Recent Parts found!

Parametric Search

releaseDate Part Number Ordering Min Frequency (MHz) Max Frequency (MHz) Gain (dB) OIP3 (dBm) Bias Current (mA) Bias Voltage (V) NF (dB) Package Short Description ROHS Attenuator Range (dB) Gain Flatness (db) 75 Ohm Package Category Lead-Free Datasheet Application Notes FTTx Amplifier Output P1dB (dBm) Marking Features Product Image Lead Finish Brightcove Video Model Data (Sparameters)
 
 
 
 
 
 
 
 
 
 
MAAM-010239 Buy 50 1000 30 35 215 5 3.5 4mm PQFN-20LD
Low Noise FTTx Amplifier 50 - 1000 MHz
60 65 Yes
Plastic
Yes
MAAM-010239.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
20 A058
Low Distortion
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm 20-Lead PQFN Package
Low Noise Figure
4x4 mm-20 PQFN.jpg
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
MAAM-010239_Sparms.zip
MAAM-010333 Inquire 50 1200 33 260 5 4mm PQFN-24LD
Optical Node RF Amplifier 50 - 1000 MHz
65 68 Yes
Plastic Surface Mount
Yes
MAAM-010333.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A063
-8 dBm to +2 dBm Optical Input Range
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm PQFN-24LD Plastic Package
+24 dBmV/ch Output at 550 MHz
27 dB Gain Control Range
29 dB Gain at 55 MHz; 34 dB Gain at 1000 MHz
Single +5 V Bias
Low Equivalent Input Noise (EIN): 3.2 pA/rtHz
4x4_24-lead PQFN.jpg
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
3606928824001
MAAM-008863 Buy 50 1000 37 220 5 4.8 4mm PQFN-24LD
FTTx RF Amplifier 50 - 1000 MHz
62 61 Yes
Plastic
Yes
MAAM-008863.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A048
-8 dBm to +2 dBm Optical Input Range
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm PQFN-24LD Plastic Package
+20 dBmV/ch Flat Output
25 dB Gain Control Range
37 dB Gain; Flat from 55 MHz to 1000 MHz
+5 V Bias
Low Equivalent Input Noise (EIN): 4.8 pA/rtHz
4x4_24-lead PQFN.jpg
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
3606928824001
MAAM-007796 Buy 50 1000 21 35 160 5 3.8 4mm PQFN-20LD
Low Noise FTTx Amplifier 50 - 1000 MHz
70 70 Yes
Plastic Surface Mount
Yes
MAAM-007796.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A036
Low Distortion •
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm 20-Lead PQFN Package
Low Noise Figure
4x4 mm-20 PQFN.jpg
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
MAAM-007796-000000.zip
MAAM-007807 Buy 50 1000 9 35 60 5 3.8 SOT-89
Broadband CATV Amplifier 50 - 1000 MHz
65 70 Yes
Plastic Surface Mount
Yes
MAAM-007807.pdf
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Yes
20
75 ? Input / Output Match
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
9 dB Gain
3.8 dB Noise Figure
Lead-Free SOT-89 Package
SOT-89.jpg
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
MAAM-007807-000000.zip
X

By continuing to use this site you consent to the use of cookies in accordance with our Cookie Policy