MACOM's optoelectronics products also includes a wide range of transimpedance amplifiers (TIA) for line and client side 10G, 40G and 100G fiber optic receivers. Our portfolio includes linear TIAs for long haul coherent receivers and limiting TIAs for shorter range NRZ based receivers. These parts feature market leading gain, noise performance and power dissipation. They are available in die form for integration with photo-detectors in an optical sub-assembly.
Part Number | Ordering | Short Description | Max Data Rate (Gbps) | Differential Transimpedance Gain (kOhms) | Small Signal Bandwidth (GHz) | Input Overload Current (mA) | Input Referred Noise (IRN, RMS nA) (nA) | Optical sensitivity with PIN (dBm) | Optical Sensitivity with APD (dBm) | ADS & SPICE Model Info | Application Notes | Benefits | Brightcove Video | Burst Mode | Compatible Parts | Content | Data Sheet Package Outline | Datasheet | Device Firmware | ESD | EVM GUI Software | EVM User Guides | EVM/Reference Design Guides | Embedded CDR | Features | LF Cutoff Frequency (KHz) | Last Time Buys | Lead Finish | MSL | Marking | Model Data (Sparameters) | Number of Channels | Outline Drawings | Output Swing Voltage (mV) | PCNs | Package Size | Package Type | Power Consumption (Watts) | Product Briefs | Product Bulletins | Product Image | Qualification Reports | Reference Design/Schematic | RoHS/IPC Report | Supply Voltage (V) | Whitepaper |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||
MATA-03802A | Inquire |
Dual Channel Linear TIA
|
32 | 5 | 25 | 2 |
MATA-03802A.pdf
|
Dual Channel Linear TIA’s with AGC
Includes Linear Peak Detector Output Low Power Consumption: 350mW (Typ)/channel Adjustable Bandwidth: 17-25 GHz (Typ.) Transimpedance Gain: 200O to 5KO Data Rate: NRZ Data Rate up to 32Gbps |
||||||||||||||||||||||||||||||||||||||
M02035 | Inquire |
Burst Mode OLT TIA
|
2.5 | 3.6 | 1.7 | 1.5 | 250 | -33 |
02035-DSH-001-B.pdf
M02035-13_-23_-33.pdf M02035_11_21_31.pdf |
Typical continuous mode -31.5 dBm sensitivity, -6 dBm saturation at 2.5 Gbps when used with a 8 A/W APD (Cpd = 0.3 pF, BER 10-10)
Available in die form only Standard +3.3 Volt supply Differential output Fabricated in standard CMOS 10 ns typical burst settling time Burst to burst dynamic range of 25 dB Typical single-ended transimpedance: 0.8 kO |
||||||||||||||||||||||||||||||||||||
M02036 | Inquire |
Burst Mode GPON OLT TIA
|
1.3 | 3.8 | 0.8 | 2.5 | 170 | -35 |
02036-DSH-001-E.pdf
M02036_12_22_32.pdf M02036_13_23_33.pdf |
Typical -33.5 dBm sensitivity, -6 dBm saturation at 1.25 Gbps when used with a 9 A/W APD (Cpd = 0.3 pF, BER 10-10)
Standard +3.3 Volt supply Differential output Fabricated in standard CMOS 10 ns typical burst settling time Burst to burst dynamic range of 25 dB Burst average receiver power monitor output Typical single-ended transimpedance: 1 kO Available in die form only |
||||||||||||||||||||||||||||||||||||
M02029 | Inquire |
CMOS TIA with AGC
|
3.1 | 10 | 1.85 | 4 | 130 | -35 |
Single +3.3 V supply
|
M02029-13.pdf
|
Typical -35 dBm Sensitivity with an APD, 130 nARMS Noise
Internal or external bias for photodiode Bonding flexibility 4 mApp Overload input current 6.2kO Differential Transimpedance RSSI (IMON) supports APD Imon monitoring No internal ROSA VCC filter capacitor required for typical operation No filter (PINK) capacitor required Data rates from 100 Mbps 8b/10b to 3.125 Gbps |
|||||||||||||||||||||||||||||||||||
MATA-003806 | Inquire |
32 Gbps Dual Channel Linear TIA for DP-QPSK Advanced Receivers
|
32 | 10000 | 25 | 3 | 17 |
MATA-03806.pdf
|
MABT-011000.png
|
|||||||||||||||||||||||||||||||||||||
M02129 | Inquire |
8.5 Gbps Transimpedance Amplifier with AGC
|
10.3 | 2 | 7.8 | 3 | 1200 | -18 | -25 |
C
|
02129-DSH-001-D.pdf
|
No
|
Typical -17.5 dBm OMA sensitivity at 8.5 Gbps and -21.5 dBm OMA sensitivity at 1.25 Gbps
Single +3.3 V supply Internal or external bias for photodiode Photodiode current monitor 2 mAPP overload input current 4.5kO differential transimpedance AGC provides dynamic range of 23 dB No filter (PINK) capacitor required Data rates to 8.5 Gbps with rate selectable option at 1 Gbps |
30 |
1
|
200 |
1.242x0.932mm
|
Dice
|
0.115 |
MACOM_general.png
|
3.3 | |||||||||||||||||||||||||
M02139 | Inquire |
1 Gbps to 10.3 Gbps TIA with AGC and Rate Select
|
10.3 | 2.5 | 7.5 | 2.5 | 1500 | -20 | -27 |
C
|
02139-DSH-001-D.pdf
|
No
|
Typical -19 dBm average sensitivity @ 10.3 Gbps
Available in die form only Single +3.3 V supply Internal or external bias for photodiode Photodiode current monitor 2 mAPP overload input current 3.8 kO differential transimpedance AGC provides dynamic range of 23 dB No filter (PINK) capacitor required Low rate mode for 1 Gbps/1.25 Gbps operation |
30 |
1
|
140 |
1.242x0.932mm
|
Dice
|
0.142 |
MACOM_general.png
|
3.3 | |||||||||||||||||||||||||
M02026 | Inquire | 1.2 | 112 | 1.05 | 4 | 120 | -31 |
C
|
Inquire |
No
|
Typical -33.3 dBm sensitivity
Same pad layout and die size as M02011/13/14/15/16/20/24 Single +3.3V supply Internal or external bias for photodiode Photodiode current monitor 4 mAPP overload input current 120 kO differential transimpedance AGC provides dynamic range of 40 dB No filter (PINK) capacitor required Data rates to 1.25 Gbps |
35 |
1
|
210 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.13 |
MACOM_general.png
|
M02026-32_IPC-1752-1_v11a_TSMC.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||||
M02038 | Inquire |
1.25 Gbps Burst Mode CMOS TIA
|
1.2 | 8.5 | 0.85 | 4 | 350 | -34 |
B
|
02038-DSH-001.pdf
M02038-13_-23_-33.pdf |
No
|
Typical -34 dBm sensitivity, -6 dBm saturation at 1.25 Gbps when used with a 8 A/W APD (CPD = 0.2 pF, BER 10-12)
Available in die form only Standard +3.3 volt supply Differential output Fabricated in standard CMOS 200 ns typical burst settling time Burst-to-burst dynamic range of >25 dB Burst average receiver power monitor output Typical differential transimpedance of 8 kO |
3000 |
1
|
275 |
1.090x0.88mm
|
Dice
|
0.082 |
MACOM_general.png
|
3.3 | ||||||||||||||||||||||||||
M02013 | Inquire |
3.2 Gbps AGC Pre-Amplifier
|
3.1 | 10 | 2.4 | 4 | 475 | -23 |
C
|
M02013.pdf
|
No
|
Typical -23 dBm sensitivity, +3 dBm saturation at 3.2 Gbps (-24 dBm at 2.5 Gbps) when used with 0.9 A/W InGaAs PINs. (Cpd = 0.5 pF BER 10-10)
Minimum 2.0 Ghz bandwidth and multi-pole roll-off for operation to 3.125Gbps AGC provides dynamic range of more than 25 dBm Available as die only +3.3 Volt supply 50O differential output Monitor output Low-cost CMOS Typical differential transimpedance: 10 kO Same pad layout as the M02011/4/5/6 |
50 |
1
|
140 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 02013-PCN-001-A.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.14 |
02013-BRF-001-A.pdf
|
MACOM_general.png
|
620978A.zip
MH07-X710_Rev_00.pdf MH07-X700_Rev_00.pdf |
m02013-3a_ipc-1752-1_v1.02.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
|||||||||||||||||||||
M02024 | Inquire |
2.5 Gbps AGC Ultra-High-Sensitivity Pre-Amplifier
|
2.5 | 51 | 1.27 | 4 | 180 | -28 |
C
|
02024-DSH-001-E.pdf
|
No
|
-29 dBm sensitivity
Same pad layout and die size as M02011/13/14/15/16 Single +3.3V supply Internal or external bias for photodiode Photodiode current monitor 4 mAPP overload input current +6 dBm Input overload AGC provides dynamic range of 35 dB Integrated filter, eliminates need for a capacitor on the photodiode cathode Data rates to 2.5 Gbps |
40 |
1
|
110 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.13 |
M02024-BRF-001-A.pdf
|
MACOM_general.png
|
M02024-12_IPC-1752-1_v11a_TSMC.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02028 | Inquire | 1.2 | 24 | 1.3 | 4 | 80 | -31 |
C
|
Inquire |
No
|
Typical -31.0 dBm sensitivity with CPD of 0.75 pF
Single +3.3 V supply Internal or external bias for photodiode Bonding flexibility (M02028-12/-22/-32) On-die temperature sensor (M02028-11/-21/-31) 4 mApp overload input current 20 kO differential transimpedance Two RSSI (IMON) options to support APD and PIN Diode PD No internal ROSA VCC filter capacitor required for typical operation No filter (PINK) capacitor required Data rates from 100 Mbps 8b/10b to 1.25 Gbps |
20 |
1
|
50 |
1.090x0.88mm
|
Dice
|
0.14 |
MACOM_general.png
|
M02028_IPC-1752-2_v11a_TSMC.pdf
|
3.3 | ||||||||||||||||||||||||||
M02020 | Inquire |
4 Gbps CMOS Transimpedance Amplifier with AGC
|
4.3 | 3.6 | 3.4 | 4 | 550 | -23 | -29 |
C
|
M02020-12.pdf
|
No
|
Typical -23 dBm Sensitivity
Same pad layout and die size as M02011/13/14/15/16/24/26 Single +3.3V supply Internal or external bias for photodiode Photodiode current monitor 4 mAPP overload input current 3 kO differential transimpedance AGC provides dynamic range of 29 dB No filter (PINK) capacitor required Data rates to 4.25 Gbps |
17 |
1
|
140 |
020xx-PCN-006-A.pdf
CN-042811 020XX Pack and Ship PCN.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.145 |
MACOM_general.png
|
M02020-XX_IPC-1752-1_v11a_TSMC-SSMC.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02015 | Inquire |
2.5 Gbps AGC Pre-Amplifier
|
2.5 | 9 | 1.4 | 4 | 290 | -26 |
C
|
M02015.pdf
|
No
|
Typical -26 dBm sensitivity, > +6 dBm saturation at 2.5 Gbps
Monitor Output Operates on a single 3.3V supply Differential 100O output impedance Maximum jitter of 70 ps p-p Typical differential transimpedance: 9kO Overload of 6ma p-p Input-referred noise of 280na (typical) Bandwidth 1.8 Ghz (typical) AGC provides dynamic range of more than 32 dB |
35 |
1
|
140 |
020xx-PCN-006-A.pdf
020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.096 |
02015-BRF-001-A.pdf
|
MACOM_general.png
|
M02015-11_IPC-1752-1_v11a_TSMC.pdf
M02015-XX_IPC-1752-1_v11a_TSMC-SSMC.pdf M02015-21_IPC-1752-1_v11a_TSMC.pdf |
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02025 | Inquire | 3.2 | 20 | 1.45 | 4 | 120 | -30 |
C
|
M02025-18.pdf
|
No
|
Typical -30.0 dBm sensitivity, 120 nARMS noise*
Single +3.3 V supply Internal or external bias for photodiode Bonding flexibility (M02025-15/-25/-35) On-die temperature sensor (M02025-14/-24/-34) 4 mApp overload input current 20 kO differential transimpedance Two RSSI (IMON) options to support APD and PIN Diode PD No internal ROSA VCC filter capacitor required for typical operation No filter (PINK) capacitor required Data rates from 100 Mbps 8b/10b to 3.125 Gbps * with 0.35 pF CPD, 135 nARMS with 0.5 pF CPD |
20 |
1
|
50 |
1.090x0.88mm
|
Dice
|
0.14 |
MACOM_general.png
|
M02025_IPC-1752-2_v11a_TSMC.pdf
M02025-XX_IPC-1752-1_v11a_TSMC-F6.pdf |
3.3 | ||||||||||||||||||||||||||
M02016 | Inquire |
1.25 Gbps AGC Pre-Amplifier
|
1.3 | 24 | 1 | 4 | 130 | -29 |
C
|
M02016.pdf
|
No
|
Typical -29dBm sensitivity, +6 dBm saturation at 1.25 Gbps when used with 0.9 A/W InGaAs PIN. (Cpd = 0.5pF, BER 10-10)
Same pad layout and die size as M02011/3/4/5 Internal or external bias for photodiode AGC provides dynamic range of 35 dBm Monitor Output Available in die form only PIN or APD sensor Standard +3.3 Volt supply Differential output Fabricated in standard CMOS Typical differential transimpedance: 24 kO Minimum 800 Mhz bandwidth and multi-pole roll-off provide operation to 1.25Gbps |
70 |
1
|
140 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 02016-PCN-001-A.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.096 |
02016-BRF-001-A.pdf
|
MACOM_general.png
|
620978A.zip
MH07-X690_Rev_00.pdf MH07-X680_Rev_00.pdf |
m02016--xx_ipc-1752-1_v1-02.pdf
M02016-XX_IPC-1752-1_v11a_TSMC.pdf |
3.3 |
02XXX-WTP-001-A.pdf
|
|||||||||||||||||||||
M02014 | Inquire |
transimpedance amplifier (TIA) with automatic gain control
|
2.5 | 11 | 1.4 | 4 | 250 | -26.5 |
C
|
02014-dsh-001-d.pdf
|
No
|
Typical -27 dBm sensitivity, > +6 dBm saturation at 2.5 Gbps
AGC provides dynamic range of more than 32 dB Monitor Output Operates on a single 3.3V supply Differential 100O output impedance Maximum jitter of 60 ps p-p Typical differential transimpedance: 13kO Overload of 6ma p-p Input-referred noise of 253na (typical) Bandwidth 2.2 Ghz (typical) |
35 |
1
|
140 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.125 |
02014-BRF-001-A.pdf
|
MACOM_general.png
|
M02014-11_IPC-1752-1_v11a_TSMC.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02011 | Inquire |
622 Mbps AGC Pre-Amplifier
|
0.6 | 65 | 0.6 | 4 | 50 | -34 |
C
|
M02011.pdf
|
No
|
Typical -34 dBm sensitivity, > +6 dBm saturation at 622 Mbps
AGC provides dynamic range of more than 40 dB Monitor Output Operates on a single 3.3V supply Differential 100O output impedance Maximum jitter of 100 ps p-p Typical differential transimpedance: 66kO Overload of 8ma p-p Input-referred noise of 56na (typical) Bandwidth 600 Mhz (typical) |
13 |
1
|
140 |
020xx-PCN-006-A.pdf
020xx-PCN-007-A.pdf |
1.090x0.88mm
|
Dice
|
0.095 |
02011-BRF-001-A.pdf
|
MACOM_general.png
|
M02011--XX_IPC-1752-1_v1-02.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02006 | Inquire |
155 Mbps AGC Pre-Amplifier
|
0.2 | 260 | 0.1 | 2.2 | 8 | -39 |
C
|
M02006.pdf
|
No
|
Fabricated in standard high-volume CMOS process
Available as die Pin-compatible with other pre-amplifiers Minimum -39 dBm sensitivity,+3 dBm saturation at 155 Mbps when used with 0.9 A/W InGaAs PINs (BER 10E-10) Only requires one capacitor for supply decoupling Differential output 150 kohms transimpedance Operates with standard +5 V or ECL supplies Priced to suit both high-volume datacom and telecom applications |
30 |
1
|
300 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 020xx-PCN-007-A.pdf |
1.010x0.960mm
|
Dice
|
0.15 |
02006-BRF-001-A.pdf
|
MACOM_general.png
|
M02006--XX_IPC-1752-1_v1-02.pdf
|
5 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||||
M02009 | Inquire |
a low-noise transimpedance amplifier with AGC
|
0.6 | 36 | 0.4 | 4.5 | 70 | -32 |
C
|
02009-DSH-001-D.pdf
|
No
|
Low-cost IC, fabricated in advanced sub-micron pure CMOS process
Monitor O/P gives linear indication of received optical power Power dissipation of 130 mW at 3.3 V supply typical 33 dB power-supply noise rejection AGC gives continuous operation to +3 dBm Minimum 415 MHz bandwidth and multi-pole roll-off allows a wide range of operation up to 622 Mbps Available as die only Differential output Typical differential transimpedance at low signal levels of 32 k ohms Receiver sensitivity better than -32 dBm at 622 Mbps |
40 |
02009-LTB-001-A.pdf
|
1
|
400 |
020xx-PCN-007-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf |
1.020x0.890mm
|
Dice
|
0.1 |
02009-BRF-001-A.pdf
|
MACOM_general.png
|
M02009X-WP-T_IPC-1752-2_v11a_TSMC.pdf
|
3.3 |
02XXX-WTP-001-A.pdf
|
|||||||||||||||||||||
M02007 | Inquire |
a low-noise transimpedance amplifier with AGC
|
0.2 | 62 | 0.14 | 2.8 | 8 | -39 |
C
|
02007-DSH-002-E.pdf
|
No
|
Low-cost IC, fabricated in advanced sub-micron pure CMOS process
Power dissipation of 65mW at +3.3 V supply >35 dB power supply noise rejection AGC gives continuous operation to +3 dBm Receiver sensitivity better than -39 dBm at 300 Mbps when integrated into a module with suitable photodiode and post-amplifier Available as die only Differential output Typical differential gain of 60 kohms at low signal levels 140 MHz bandwidth allows wide range of operation; suitable for 100, 125, 155 and 200 Mbps |
35 |
02007-LTB-002-A.pdf
|
1
|
300 |
020xx-PCN-006-A.pdf
CN-042811-020XX-Pack-and-Ship-PCN.pdf 020xx-PCN-007-A.pdf |
1.010x0.960mm
|
Dice
|
0.07 |
02007-BRF-001-A.pdf
|
02007-PBD-001-A.pdf
|
MACOM_general.png
|
M02007--XX_IPC-1752-1_v1-02.pdf
M02007-XX_IPC-1752-1_v11a_TSMC.pdf |
3.3 |
02XXX-WTP-001-A.pdf
|
||||||||||||||||||||
M02027 | Inquire |
100 Mbps to 3.1 Gbps Multirate CMOS TIA with AGC
|
3.1 | 42 | 1.5 | 4 | 91 |
M02027.pdf
|
M02027_PBD_1.pdf
|
Macom gen.png
|
||||||||||||||||||||||||||||||||||||
M03101 | Inquire |
28 Gbps Quad Channel Transimpedance Amplifier (TIA)
|
28 | 21 |
M03100-13_M03101-13_M03102-13.pdf
|
500 µm channel spacing
Single +3.3 V supply No filter (PINK) capacitor required Data rates from 10.3 to 28 Gbps Typical 21 GHz bandwidth in high rate mode Typical 1.4 µA noise in high rate mode |
Bare Die
|
|||||||||||||||||||||||||||||||||||||||
M03102 | Inquire |
28 Gbps Quad Channel Transimpedance Amplifier (TIA)
|
28 | 21 |
M03100-13_M03101-13_M03102-13.pdf
|
750 µm channel spacing
Single +3.3 V supply No filter (PINK) capacitor required Data rates from 10.3 to 28 Gbps Typical 21 GHz bandwidth in high rate mode Typical 1.4 µA noise in high rate mode |
Bare Die
|
|||||||||||||||||||||||||||||||||||||||
M03002 | Inquire |
28 Gbps Transimpedance Amplifier (TIA)
|
28 | 21 |
M03002-13.pdf
|
Typical 1.4 µA noise in high rate mode
Single +3.3 V supply No filter (PINK) capacitor required Data rates from 8.5 to 28 Gbps Typical 21 GHz bandwidth in high rate mode |
Bare Die
|
|||||||||||||||||||||||||||||||||||||||
MATA-02135 | Inquire |
8.5/10/11.3 Gbps Limiting TIA
|
11.3 | 3.4 | 8.2 | 3 | 850 | -21 | -27 |
MATA-02135A.pdf
|
Die
|
Die
|
Macom gen.png
|
|||||||||||||||||||||||||||||||||
M03100 | Inquire |
28 Gbps Quad Channel Transimpedance Amplifier (TIA)
|
28 | 2.9 | 22 | 2.8 | 1 | -17 |
M03100-13_M03101-13_M03102-13.pdf
|
Waffle Pack
|
MACOM Gen.png
|
|||||||||||||||||||||||||||||||||||
MATA-02238 | Inquire |
10G EPON Burst Mode TIA with Rate Select
|
10.3 | 6 | 9 | 1.6 | 1 | -31 | Inquire |
New gen low power 10.3 G dual date burst mode TIA
Typical -32 dBm sensitivity with APD at 1e-3 BER Selection between fixed rated (10G mode only) or dual rate (1G/10G mode) |
Dice
|
General MACOM image.png
|
||||||||||||||||||||||||||||||||||
MATA-03003 | Inquire |
28 Gbps TIA
|
28 | 3.8 | 21 | 4 | 1 | -18 | Inquire |
Second Gen single channel TIA for ROSA or Chip-on-board assembly
Low power operation typical 80 mW Data rates from 8.5 to 28 Gbps 21 GHz bandwidth in high rate mode |
Dice
|
General MACOM image.png
|
||||||||||||||||||||||||||||||||||
MATA-03013 | Inquire | 28 | 3.8 | 21 | 4 | 1 | -18 | Inquire |
Second Gen single channel TIA for ROSA or Chip-on-board assembly
Low power operation typical 80 mW Data rates from 8.5 to 28 Gbps 21 GHz bandwidth in high rate mode |
Dice
|
General MACOM image.png
|
|||||||||||||||||||||||||||||||||||
MATA-005817 | Inquire |
56 Gbaud Single Channel Linear TIA
|
56 | 6 | 35 | 2 | 0 | Inquire |
General MACOM image.png
|
|||||||||||||||||||||||||||||||||||||
MATA-38434 | Inquire |
MATA-38434A V3P.pdf
|
4
|
Die
|
||||||||||||||||||||||||||||||||||||||||||
MATA-03006 | Inquire |
28 Gbps Transimpedance Amplifier (TIA)
|
28 | 3.8 | 21 | 4 | 1 | Inquire |
Optimized for APD diode
|
General MACOM image.png
|
||||||||||||||||||||||||||||||||||||
MATA-03819 | Inquire | Inquire |
4
|
Wirebonded or Flip Chip
|
||||||||||||||||||||||||||||||||||||||||||
MATA-03820 | Inquire | Inquire |
4
|
Wirebonded or Flip Chip
|
||||||||||||||||||||||||||||||||||||||||||
MATA-03919 | Inquire | Inquire |
4
|
Wirebonded or Flip Chip
|
||||||||||||||||||||||||||||||||||||||||||
MATA-03920 | Inquire | Inquire |
4
|
Wirebonded or Flip Chip
|
||||||||||||||||||||||||||||||||||||||||||
MATA-07825 | Inquire |
12 Gbps SDI Transimpedance Amplifier (TIA)
|
12 | 6 | 9 | 2 | 1 | -17 |
MATA-07825.pdf - MATA-07825.pdf
|
Die
|
MACOM-die - MACOM-die
|
|||||||||||||||||||||||||||||||||||
MATA-006406 | Inquire |
64 GBaud Quad Channel Linear TIA
|
64 | 5000 | 45 | 4 | 17 | Inquire |
Die
|
MACOM Gen.png
|
||||||||||||||||||||||||||||||||||||
MATA-006806 | Inquire |
64 GBaud Quad Channel Linear TIA
|
64 | 65 | 45 | 4 | 17 | Inquire |
Die
|
MACOM Gen.png
|