Facebook
Twitter
LinkedInProduct Detail
CATV Push Pull Amplifier
The MAAM-009455 is a GaAs MMIC amplifier in a
lead-free 4 mm 20-lead PQFN package. The MMIC
design is configured as a pair of cascode MESFET
amplifiers for broadband performance. It is designed
for integration in a 75 ? push-pull, low distortion,
amplifier circuit.
This device is ideally suited for use in CATV, FTTX,
DBS, and HDTV applications where low noise figure
and low distortion are required.
Features
- 20 dB Gain
- RoHS* Compliant
- Halogen-Free “Green” Mold Compound
- Lead-Free 4 mm 20-Lead PQFN package
- Low Distortion
- Differential Inputs and Outputs
- 260°C Reflow Compatible
- 8 V DC Bias
Applications
- Wired Broadband
Specifications
- NF: 4.2 dB
- Bias Voltage: 8 V
- Gain: 20.5 dB
- Output P1dB: 26 dBm
- OIP3: 43 dBm
- Min Frequency: 50 MHz
- Attenuator Range: 70 dB
- Gain Flatness: 70 dB
- Bias Current: 325 mA
- Max Frequency: 1,000 MHz
Datasheet
Model Data (Sparameters)
Application Notes
- AN3009 - S-Parameter S2P File Format Guide
- AN3018 - Known Good Die Delivery Specification
- ANI-019 - Tape and Reel Packaging and Orientation for Surface Mount Components
- C2083 - C2083 Application Note is Replaced by S2083
- M513 - Tape and Reel Packaging for Surface Mount Components
- M538 - Surfacing Mounting Instructions - Footprint Guidelines
- M541 - Bonding, Handling, and Mounting Procedures for Chip Diode Devices
- M567 - CR-15 Package Handling and Mounting Procedure
- M570 - Bonding, Handling, and Mounting Procedures for Millimeterwave PHEMT MMICs
- S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
- S2083 - Surface Mounting Instructions for PQFN Packages
- AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
- AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
- C2084 - Ceramic Surface Mount Amplifiers
- M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
- M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
- AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Package
- 4mm PQFN-20LD
Package Category
- Plastic
Marking
- A049
Lead Finish
- 100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
| Part Number | Package | MACOM | Richardson RFPD | DigiKey | Mouser | Richardson Electronics |
|---|---|---|---|---|---|---|
|
MAAM-009455-000000
Amplifier, Push-Pull, 4mmPQFN-20LD
|
4MM PQFN-20LD | Inquire | ||||
|
MAAM-009455-001SMB
Sample Board_Amplifier, 4mmPQFN-20LD
|
4MM PQFN-20LD |
In Stock: 3
Buy
|
||||
|
MAAM-009455-TR1000
Amplifier, Push-Pull, 4mmPQFN-20LD
|
4MM PQFN-20LD |
In Stock: 1000
Buy
|
Buy | |||
|
MAAM-009455-TR3000
Amplifier, Push-Pull, 4mmPQFN-20LD
|
4MM PQFN-20LD | Inquire | Buy |
Recently Viewed
- No Recent Parts found!
Technical Resources
Resources
