Learning

MACOM's MAOM-003427 is the Industry’s first surface mount modulator driver with 46 Gbaud capability to support next generation 200G and 400G applications

7 W Pulsed High Power Amplifier

Listen to Paul Beasly, Product Manager at MACOM, as he discusses the MAAP-011022; high power amplifier designed for civil air traffic control and weather radar applications

New 4 W Ka-Band Power Amplifier

Listen to Paul Beasly, Product Manager at MACOM, as he discusses high linearity power amplifier- MAAP-011139

Switches: MASW-011030 & MASW-011055

Listen to Paul Wade, Product Manager at MACOM, as he discusses two asymmetrical switches, ideal for high power civilian and military radio applications

Switches: MASW-011040 & MASW-011041

Listen to Paul Wade, Product Manager at MACOM, discuss two fully integrated switches- MASW-011040 & MASW-011041

DOCSIS 3.1 Compliant CATV Amplifiers

Listen to expert Graham Board--Director of Carrier Networks group- discuss MACOM's portfolio of Docsis 3.1 compliant cable amplifiers for CATV and broadband infrastructure access equipment

DOCSIS 3.1 Compliant Passive Components

Listen to expert Graham Board--Director of Carrier Networks group at MACOM- discuss the industry's broadest portfolio of Docsis 3.1 compliant passive components for CATV and broadband cable systems

Surface Mount Triplexer Filters for MoCA-enabled CPE

Listen to expert Graham Board--Director of Carrier Networks group at MACOM - discuss the MAFL-011018/011023/011025; surface mount triplexer filters for MOCA enabled customer premises equipment

MACOM FTTx Amplifiers

Watch MACOM Test Engineer Declan Healy show you how to measure CSO/CTB and RF output power for our new FTTx Amplifiers.

Demonstration of Transimpedence Gain

Watch MACOM Test Engineer Declan Healy demonstrate our FTTx amplifier and measure Transimpedence Gain from the optical input to the RF output of the amplifier

Live at OFC - MACOM's next generation 100/200Gbs drivers for Long Haul and Metro Applications

Vikas Manan, Director of Product Development, Optoelectronics, describes MACOM's next generation 100/200Gbs drivers for Long Haul and Metro Applications.

Live at OFC - Lowest Power Transmit Solution for 100GbE LR4

Ray Moroney, MACOM's product line manager for Optoelectronics, describes MACOM's latest EML driver solution for 100 gigabit Ethernet applications in CFP2 and CFP4 form factors for distances up to 10km.

MACOM's 4K Video Demo at the 2014 NAB Show

Russell Thomas shows off our latest 6G Solutions for 6G-SDI video routing, switching and signal integrity.

MACOM's MADP-011037 Series Pin Diode Technical Video #1

Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about key features of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power. 

MACOM's MADP-011037 - Series PIN Diode Technical Video #2

Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about Technical Design Benefits of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power. 

MACOM's MADP-011037-13900T - Series PIN diode

Listen to expert Paul Wade, Product Manager for Didoe Standard Products,  talk about MACOM's Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.

MAAM-011100 Ultra Small, Broad Band, Variable Gain Amplifier:

Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, talk about MACOM's new MAAM-011100 variable gain amplifier. This device operates from 0.4GHz to 20 GHz, has a gain control range of 30 dB with +13 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.

MACOM's MASW-011036

Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talk about MACOM's product MASW-011036 ideally suited for Ka-Band TR Switch applications for commercial and military applications requiring up to 16Watts of power handling.

MACOM's 2.0-6.0 GHz 12 W Power Amplifier

Listen to expert Paul Beasly, Product Manager for Radar Products, talk about MACOM's 2.0-6.0 GHz 12 W Power Amplifier. The MAAP-010169 boasts excellent return loss performance, high gain and broad frequency operation, making the device an ideal high power wide band solution.

MA4AGSW series

AlGaAs Multi-Throw Switch Series Listen to expert Paul Wade,  Product Manager for Diode Standard Products, talk about MACOM's AlGaAs PIN diode switch series (MA4AGSW series). These chip scale devices are ideally suited for switch applications operating from 50MHz up to 70GHz. These are offered in various configurations from SPST to SP8T.

MACOM's Shunt PIN diode series 

Listen to expert Paul Wade, Product Manager for Diode Standard Products, talk about MACOM's Shunt PIN diode series (MADP-011027, MADP-011028 & MADP-011029). These plastic packaged devices (1.5 X 1.2mm DFN) are ideally suited for switch applications operating from 50MHz to 12GHz with power handling up to and beyond 100W CW incident power.

MACOM's MASW-011040

Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talks about MACOM's product MASW-011040 ideally suited for packaged (9mm) multi-throw switch applications from 30MHz to 1.5GHz with up to 200Watts of power handling

MACOM's MASW-011041

Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talk about MACOM's product MASW-011041 ideally suited for packaged (9mm) multi-throw switch applications from 30MHz to 1.5GHz with up to 200Watts of power handling.

MACOM's MASW-010646

Listen to expert Kevin Harrington, Product Line Manager of A&D Communications, talk about MACOM's product MASW-010646 ideally suited for Ka-Band TR Switch applications for commercial and military applications requiring up to 16Watts of power handling.

MACOM's 5.2-5.9 GHz 8W Power Amplifier

Listen to expert Paul Beasly, Product Manager for Radar Products, talk about MACOM's 5.2-5.9 GHz 8W Power Amplifier. This PQFN packaged GaAs power amplifier offers high gain and power with cost effective SMT assembly techniques.

MACOM's quad channel modulator driver for 100G metro applications

Listen to expert Ray Moroney, Product Manager for Optoelectronics, talk about MACOM's quad channel modulator driver for 100G metro applications. This driver in a 13x19mm surface mount package has 4 channels with differential inputs and single-ended outputs and is a low power solution for coherent CFP and CFP2 modules.

MAAM-011109 Ultra Wide Band Amplifier:

Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new MAAM-011109 ultra wide band amplifier. This device operates from 10 MHz to 40 GHz, is fully matched to 50 ohms, provides approximately 12 dB of Gain and is packaged in a convenient 5mm by 5mm laminate package.

MACOM's ultra low power EML driver 

Listen to expert Ray Moroney,  Product Manager for Optoelectronics, talk about MACOM's ultra low power EML driver for 100G ethernet applications. This quad channel driver in a 10x10mm surface mount package is the lowest power, smallest form factor solution for CFP2 and CFP4 modules.

MAAM-011101 Ultra Small, Broad Band, General Purpose Amplifier  

Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new ultra small, broad band General Purpose Amplifier. This device operates from 4 to 20 GHz, has typical Gain of 16 dB with +18 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.

Optical Transport Solutions

Discussing the advantages of optical transport for the video and broadcast industry (from the 2012 NAB Show).

Crosspoint Switch with Reconfigurable I/O

Introducing  crosspoint switches with reconfigurable I/O (from the 2012 NAB Show).

MACOM's S-Band Switch Limiter

Listen to expert Paul Beasly,  Product Manager for Radar Products, talk  about MACOM's S-Band Switch Limiter. This packaged device offers a high level of integration and high power handling making it ideally suited to Radar applications.

MACOM's Shunt Diode Technical Series #2

Hear our expert Joe Bukowski speak about the details of what MACOM has to offer on our Shunt Diode Family     

MACOM's Shunt Diode family, Technical Session #1

Listen to our expert Joe Bukowski on MACOM's Shunt Diode Family.     

MACOM's MAAM-011117 CPE Amplifier

Listen to Graham Board, Wired Broadband Product Line Manager, discuss MACOM's latest high performance CPE Amplifier. The MAAM-011117 is designed as a universal front-end amplifier with a powered down feature for CPE "Green" stand-by operation.

2 x LO Nulling Testing from MACOM   

Watch Principal Engineer Emmanuelle Convert demonstrate the testing of MAUC-010506 for 2x LO suppression.     

MACOM's UpConverter, MAUC-010506

Learn more about the Industry's Leading Upconverter for 18 and 23 GHz Point-to-Point Wireless Applications. Watch Product Manager David Richardson, speak about the device that boasts the industry's leading LO suppression which eliminates the customers' need for a Tx Filter.