Live at OFC - MACOM's next generation 100/200Gbs drivers for Long Haul and Metro Applications
Vikas Manan, Director of Product Development, Optoelectronics, describes MACOM's next generation 100/200Gbs drivers for Long Haul and Metro Applications.
Multi-Channel, Low Power Reclocker
A live demonstration of our multi-channel, low power reclocker for SDI applications (from the 2012 NAB Show).
Crosspoint Switch with Reconfigurable I/O
Introducing crosspoint switches with reconfigurable I/O (from the 2012 NAB Show).
MAAM-011101 Ultra Small, Broad Band, General Purpose Amplifier
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new ultra small, broad band General Purpose Amplifier. This device operates from 4 to 20 GHz, has typical Gain of 16 dB with +18 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.
MACOM's ultra low power EML driver
Listen to expert Ray Moroney, Product Manager for Optoelectronics, talk about MACOM's ultra low power EML driver for 100G ethernet applications. This quad channel driver in a 10x10mm surface mount package is the lowest power, smallest form factor solution for CFP2 and CFP4 modules.
MAAM-011109 Ultra Wide Band Amplifier:
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, speak about MACOM's new MAAM-011109 ultra wide band amplifier. This device operates from 10 MHz to 40 GHz, is fully matched to 50 ohms, provides approximately 12 dB of Gain and is packaged in a convenient 5mm by 5mm laminate package.
MACOM's quad channel modulator driver for 100G metro applications
Listen to expert Ray Moroney, Product Manager for Optoelectronics, talk about MACOM's quad channel modulator driver for 100G metro applications. This driver in a 13x19mm surface mount package has 4 channels with differential inputs and single-ended outputs and is a low power solution for coherent CFP and CFP2 modules.
MACOM's Shunt PIN diode series
Listen to expert Paul Wade, Product Manager for Diode Standard Products, talk about MACOM's Shunt PIN diode series (MADP-011027, MADP-011028 & MADP-011029). These plastic packaged devices (1.5 X 1.2mm DFN) are ideally suited for switch applications operating from 50MHz to 12GHz with power handling up to and beyond 100W CW incident power.
AlGaAs Multi-Throw Switch Series Listen to expert Paul Wade, Product Manager for Diode Standard Products, talk about MACOM's AlGaAs PIN diode switch series (MA4AGSW series). These chip scale devices are ideally suited for switch applications operating from 50MHz up to 70GHz. These are offered in various configurations from SPST to SP8T.
MACOM's UpConverter, MAUC-010506
Learn more about the Industry's Leading Upconverter for 18 and 23 GHz Point-to-Point Wireless Applications. Watch Product Manager David Richardson, speak about the device that boasts the industry's leading LO suppression which eliminates the customers' need for a Tx Filter.
MAAM-011100 Ultra Small, Broad Band, Variable Gain Amplifier:
Listen to expert Tom Galluccio, Product Manager for the MMIC Product Line, talk about MACOM's new MAAM-011100 variable gain amplifier. This device operates from 0.4GHz to 20 GHz, has a gain control range of 30 dB with +13 dBm of P1dB performance and is packaged in a convenient plastic 1.5mm by 1.2mm TDFN. The input & output are fully matched to 50 Ohms with a typical return loss of -12 dB.
MACOM's MADP-011037-13900T - Series PIN diode
Listen to expert Paul Wade, Product Manager for Didoe Standard Products, talk about MACOM's Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
MACOM's MADP-011037 - Series PIN Diode Technical Video #2
Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about Technical Design Benefits of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
MACOM's MADP-011037 Series Pin Diode Technical Video #1
Listen to expert Joe Bukowski – Applications Engineer for Diode Standard Products -- about key features of MACOM's Series of Thermally Enhanced Series PIN diode MADP-011037-13900T. These plastic packaged devices (3mm QFN) are ideally suited for switch applications operating to 2GHz with power handling up to and beyond 100W CW incident power.
MACOM's MAAM-011117 CPE Amplifier
Listen to Graham Board, Wired Broadband Product Line Manager, discuss MACOM's latest high performance CPE Amplifier. The MAAM-011117 is designed as a universal front-end amplifier with a powered down feature for CPE "Green" stand-by operation.
MACOM's Shunt Diode family, Technical Session #1
Listen to our expert Joe Bukowski on MACOM's Shunt Diode Family.
MACOM's Shunt Diode Technical Series #2
Hear our expert Joe Bukowski speak about the details of what MACOM has to offer on our Shunt Diode Family
MACOM's 4K Video Demo at the 2014 NAB Show
Russell Thomas shows off our latest 6G Solutions for 6G-SDI video routing, switching and signal integrity.
Live at OFC - Lowest Power Transmit Solution for 100GbE LR4
Ray Moroney, MACOM's product line manager for Optoelectronics, describes MACOM's latest EML driver solution for 100 gigabit Ethernet applications in CFP2 and CFP4 form factors for distances up to 10km.
Live at OFC - MACOM's latest signal conditioning advances for 100G
MACOM's Marek Tlalka reviews our latest signal conditioning advances for 100G applications at OFC 2014. Among MACOM's live demonstrations at the show were low-power clock and data recovery (CDR) solutions and high data rate crosspoint switches and signal conditioners.
Live at OFC - MACOM's Latest Solutions for ONU/OLT Applications
MACOM's Angus Lai reviews our latest advances for 100G at OFC 2014. Our industry-leading solutions for ONU/OLT applications are featured in this video.
Demonstration of Transimpedence Gain
Watch MACOM Test Engineer Declan Healy demonstrate our FTTx amplifier and measure Transimpedence Gain from the optical input to the RF output of the amplifier
MACOM FTTx Amplifiers
Watch MACOM Test Engineer Declan Healy show you how to measure CSO/CTB and RF output power for our new FTTx Amplifiers.
DOCSIS 3.1 Compliant Passive Components
Listen to expert Graham Board--Director of Carrier Networks group at MACOM- discuss the industry's broadest portfolio of Docsis 3.1 compliant passive components for CATV and broadband cable systems
DOCSIS 3.1 Compliant CATV Amplifiers
Listen to expert Graham Board--Director of Carrier Networks group- discuss MACOM's portfolio of Docsis 3.1 compliant cable amplifiers for CATV and broadband infrastructure access equipment
Switches: MASW-011040 & MASW-011041
Listen to Paul Wade, Product Manager at MACOM, discuss two fully integrated switches- MASW-011040 & MASW-011041
MACOM's MAOM-003427 is the Industry’s first surface mount modulator driver with 46 Gbaud capability to support next generation 200G and 400G applications
MACOM's MAXP-37161A is a highly integrated, low power, fully non-blocking 16 channel 28 Gbps crosspoint switch, targeted for 100G Ethernet, EDR InfiniBand and OTN applications
Learn why Cloud computing-based C-Ran Network architectures are pivotal in the evolution from 4G to 5G, and how MACOM’s technology advantages are solving the current cost structure, supply chain, quality of service, and performance constraint challenges.
Learn how MACOM's serial 100 Gbps solution achieves lowest cost, lowest power, highest density, and is compatible with 400 Gbps and next-generation switch ASICs.
MASW-011102 SPDT non-reflective switch featuring broadband performance and high-speed switching.
MAAT-010521-L1 voltage variable attenuator, 5.8 - 16 GHz
MAMX-011054 & MAMX-011036 wideband double-balanced mixer family, covering 8 - 46 GHz. Available in 3 mm 12-lead AQFN packaging, and bare die. Designed for Test & Measurement, Microwave Radio, and Radar applications.
MAMG-100227-010C0L: 10 W Two-stage hybrid GaN-on-Si module ideal for tactical military communications, land mobile radio, and wireless (public safety) markets. Package design enables mounting flexibility.
MASW-011107-DIE: DC - 26.5 GHz Broadband GaAs SPDT absorptive switch ideal for VSAT, test and measurement, EW and military communication systems.
Family of Temperature Compensated Directional Power Detectors
High-performance integrated solutions with directional couplers and built-in temperature compensation to enable simplified system designs, lower costs, and unrivaled ease-of-use in a small footprint.
Non-Linear-Transmission-Line (NLTL) Comb Generators: MLPNC-7102S1 & MLPNC-7103S1
Available in SMT and SMA packaging, ideal for Radar, SATCOM, VSAT and Microwave Radio applications.
Family of Ka-Band Power Amplifiers: MAAP-011246 / MAAP-011298 / MAAP-011289 / MAAP-011233 / MAAP-011140-DIE
High power linear amplifiers operating from 27.5 - 31.5 GHz, available as 5x5 mm AQFN packaging and Bare Die.
Wireless Fronthaul/CPRI Application Video
MACOM's extensive offerings for SFP+ and SFP28 short and long reach include leading DML lasers, best in class TIAs, highly integrated driver/amplifier ICS, forming the world' leading solution for Fronthaul/Backhaul.
MAAP-118260 fully integrated power amplifier designed for 18 GHz, 23 GHz, and 26 GHz Cellular Backhaul and ISM applications.
MACOM's Lightwave Innovation Award winning MATP-10025 PRISM, 100 Gbps Serial PHY
MAAV-011013 Voltage Variable Attenuator ideal for wireless infrastructure and wireless backhaul applications.
VCO Family Product Video
MACOM's new family of signal source broadband voltage controlled oscillators include the MAOC-111100, MAOC-113900, MAOC-112675, MAOC-113100 and MAOC-110820
MACOM's MAGx-101214-500L00 is a gold-metalized matched GaN-on-Si RF power amplifier optimized for pulsed L-Band radar applications. The MAGX-101214-500L0x is constructed using a thermally enhanced, flanged ceramic package.
LNA Family Product Video
MACOM's Family of Low Noise Amplifiers (MAAL-011129, MAAL-011130 and MAAL-011141/DIE) are easy-to-use, broadband devices covering DC-31 GHz and featuring high gain, low noise and flexibility in biasing options.
High Power Switch Series: MASW-011040 / MASW-011041 / MASW-011055 / MASW-011060
50 MHz - 6000 MHz covering UHF, L and C-Band
High Power Limiter Modules: MADL-011012 / MADL-011014 / MADL-011015
Highest power handling limiters covering UHF, L and S-Band
MAAP-011250 4 W Ka-Band Power Amplifier, 27.5 - 30 GHz, designed for VSAT Communications. This device is designed for customers who need a balanced 4-stage, 4 W Ka-Band power amplifier providing 24 dB of linear gain.
MACOM has the industry's most extensive portfolio for 100G to 400G, enabling your optical designs targeting the data centers of today and tomorrow.
OpenEye MSA Demonstration
The MAAM-011238/DIE is designed for instrumentation and communication systems, for customers who need an easy-to-use wideband amplifier that provides 14 dB of linear gain. The device is available as a 2.1 x 1.05 mm die or 5x5 mm 12-lead SMT package