Optical Post Amplifiers

image-from-the-document-manager

MACOM's post-amplifiers convert differential or single-ended analog signals to high-speed digital outputs, using a chain of limiting amplifiers. Many of these products feature signal detection circuitry, programmed using an off-chip resistor. They are available in a number of speeds, covering 155 Mbps to 12.5 Gbps applications.

Recent Searches
Recently Viewed Products
  • No Recent Parts found!

Parametric Search

Part Number Ordering Short Description Package Size Max Data Rate (Gbps) Package Type Supply Voltage Power Consumption (Watts) Number of Channels Input Sensitivity (mVpp) (mV) Input Overload Swing (mV) LOS Range (mVp-p) Output Swing Voltage (mV) ADS & SPICE Model Info Application Notes Benefits Brightcove Video Compatible Parts Content Data Sheet Package Outline Datasheet Device Firmware ESD EVM GUI Software EVM User Guides EVM/Reference Design Guides Features Last Time Buys Lead Finish MSL Marking Model Data (Sparameters) Outline Drawings PCNs Product Briefs Product Bulletins Product Image Qualification Reports Reference Design/Schematic RoHS/IPC Report
 
 
 
 
 
M02044 Inquire 622 Mbps Post-Amplifier
5x6.2mm QSOP
0.6 5x6.2mm QSOP
3.3, 5
0.1 1
2.5 M02044-DSH-002-A.pdf
Pin compatible with the MC2044C
Output Jam Function
CMOS Signal Detect and LOS outputs
On-chip DC offset cancellation circuit
Programmable input-signal level detect
2.8 mV typical input sensitivity at 622 Mbps
Operates with a 3.3V or 5V supply
Low power (< 200 mW at 3.3V including PECL load)
M02050 Inquire integrated high-gain limiting amplifiers
3x3mm
2.5 QFN
3.3
0.18 1
3.5 1600 5 - 55
800 02050-DSH-002-F.pdf
02049-EVMD-001-D.pdf
Operates with a 3.3 or 5V supply
-40° to +85°C operating temperature range
Low power (< 80 mW at 3.3V, CML version)
On-chip DC offset cancellation circuit
Peak-to-peak receive power monitor output (RSSI PP)
Average receive power monitor output (RSSI AVG)
Rate selection for = 1.25 Gbps operation
PECL outputs
4 mV input sensitivity at 2.5 Gbps
0204x-PCN-004-A.pdf
02050-PCN-001-A.pdf
02050-BRF-001-A.pdf
MACOM_general.png
620978A.zip
MH07-X710_Rev_00.pdf
MH07-X700_Rev_00.pdf
M02050G-14_IPC-1752-2_v1.02.pdf
M02050G-15_IPC-1752-2_v11a_AmkorK_Au.pdf
m02050g-15_ipc-1752-2_v1.02.pdf
M02050G-14_IPC-1752-2_v11a_AmkorK_Au.pdf
M02142 Inquire 11.3 Gbps Limiting Amplifier
3x3mm
11.3 QFN
3.3
0.191 1
3 1600 10 - 60
680 M02142-13.pdf
Low power (< 140 mW) limiting amp for SFP+ applications
2-wire digital control or traditional analog control available
Supports Out of Band (OOB) signal passing
Internal offset cancellation circuit
Received Signal Strength Indicator (RSSI)
Inputs can be AC or DC coupled
5 mVPP input sensitivity at 10 Gbps
Data rates to 11.3 Gbps, +3.3V supply
MACOM_general.png
M02142G-13_IPC-1752-2_v1-1a_UnisemIpoh.pdf
M02142G-13_IPC-1752-2_v11a_Unisem_Au.pdf
M02140 Inquire 12.5 Gbps, Low Power 3.3V Post-Amplifier
4x4mm
12.5 QFN
3.3
0.185 1
8 1000 10 - 200
800 M02140-12.pdf
02140-EVMD-001-B.pdf
Wide dynamic range with 5.5 mV typical input sensitivity at 10 Gbps
On-chip DC offset cancellation circuit
Wide -40 to +85°C operating temperature range
CML data outputs with typical 23 ps rise and fall time
Operates with +3.3 V supply
Programmable input signal level detect
Received signal strength indicator (RSSI)
02140-BRF-001-A.pdf
MACOM_general.png
M02140-12_IPC-1752-2_v1-02.pdf
M02040 Inquire 2.1 Gbps, 3.3 or 5V Post-Amplifier
3x3mm
2.1 QFN
3.3, 5
0.17 1
2 1600 5 - 55
400 M02040-15.pdf
02049-EVMD-001-D.pdf
Operates with a 3.3 V or 5 V supply
16-pin 3x3 mm QFN package
Output Jam function
Low power (< 80 mW at 3.3 V)
Offset cancellation circuit can be disabled for burst mode applications
On-chip DC offset cancellation circuit
Peak-to-peak receive power monitor output (RSSI PP)
Average receive power monitor output (RSSI AVG)
PECL outputs
2 mV input sensitivity at 1.25 Gbps
-40° to +85°C operating temperature range
0204x-PCN-004-A.pdf
02040-PCN-001-A.pdf
02040-BRF-001-A.pdf
MACOM_general.png
620978A.zip
MH07-X690_Rev 00.pdf
MH07-X680_Rev_00.pdf
M02040G-14_IPC-1752-2_v1-01.pdf
M02040G-14_IPC-1752-2_v1-02.pdf
M02040G-15_IPC-1752-2_v1-02.pdf
M02040G-14_IPC-1752-2_v11a_AmkorK_Au.pdf
M02040G-15_IPC-1752-2_v11a_AmkorK_Au.pdf
M02046 Inquire 1.25 Gbps, 3.3 or 5V Post-Amplifier
5x6.2mm
1.3 QSOP
3.3, 5
0.2 1
2.8 1600 5 - 55
800 02046-APP-004-B - M02046-14/-24 Application Note: Using the M02046-14/-24 to Replace the MC2046-2C/-2 in an Existing 3.3V Design
M02046-15.pdf
02046-EVMD-001-B.pdf
Operates with a 3.3 or 5 V supply
MC2044C/MC2045-2 pin-compatible
Pin-compatible, superior replacement for Motorola MC10SX1125
-40° to +85°C operating temperature range
16-pin 3x3 mm QFN package
Output Jam function
Low power (< 80 mW at 3.3 V)
Offset cancellation circuit can be disabled for burst mode applications
On-chip DC offset cancellation circuit
Peak-to-peak receive power monitor output (RSSI PP)
Average receive power monitor output (RSSI AVG)
PECL outputs
2 mV input sensitivity at 1.25 Gbps
Available as die or in QSOP16 and TSSOP20 packages
02046-LTB-001-A.pdf
LTBWR73.pdf
LTBWR72.pdf
LTBWR71.pdf
02046-PCN-001-A.pdf
CN-012113-16L-QSOP.pdf
02046-PCN-003-A.pdf
02046-PCN-002-A.pdf
MACOM_general.png
M02046G-14_IPC-1752-2_v11a_Unisem_Au.pdf
M02046G-25_IPC-1752-2_v11a_Unisem_Au.pdf
M02046G-24_IPC-1752-2_v11a_Unisem_Au.pdf
M02046G-15_IPC-1752-2_v11a_Unisem_Au.pdf