Product Detail

HMIC PIN Diode with Bias
The MA4SW410B-1 device is a SP4T broadband switch with integrated bias network utilizing MACOM's HMICTM (Heterolithic Microwave Integrated Circuit) process, US Patent 5,268,310. This process allows the incorporation of silicon pedestals that form series and shunt diodes or vias by imbedding them in low loss, low dispersion glass. By using small spacing between elements, this combination of silicon and glass gives HMIC devices low loss and high isolation performance with exceptional repeatability through low millimeter frequencies. Large bond pads facilitate the use of low inductance ribbon bonds, while gold backside metallization allows for manual or automatic chip bonding via 80/20 - Au/Sn, 62/36/2 - Sn/Pb/Ag solders or electrically conductive silver epoxy. The MA4SW410 is a high performance switch suitable for use in multi-band ECM, radar, and instrumentation control circuits where high isolation to insertion loss ratios are required. With a standard ±5V, TTL controlled, PIN diode driver, 50nS switching speeds are achievable.
  • Broad Bandwidth
  • 50 nS Switching Speed
  • Up to +30dBm C.W. Power Handling @ +25°C
  • Glass Encapsulated Chip with Polymer Protective Coating
  • Rugged Fully Monolithic
  • Lower Insertion Loss and Higher Isolation than Comparable pHEMT or Discrete Component Designs ?
  • Usable from 50 MHz to 26.5 GHz
  • Specified from 50 MHz to 20 GHz
  • Aerospace and Defense
  • ISM
Compatible Parts
  • Min Frequency: 2,000 MHz
  • Max Frequency: 18,000 MHz
  • Insertion Loss : 0.8 dB
  • Isolation: 48 dB
  • IIP3: 40 dBm
  • CW Incident Power: 2 W
  • DIE
Package Category
  • Die/Bumped Die
  • Yes
Contact Info
Part Number Package MACOM Richardson RFPD DigiKey Mouser Richardson Electronics
HMIC SP4T w/Bias Network
In Stock: 150
In Stock: 150
In Stock: 15

Favorite Parts

Log in to MyMACOM to save your favorite parts.

Recently Viewed

  • No Recent Parts found!

Technical Resources


Get Support

Recent Searches