Facebook
Twitter
LinkedInProduct Detail
(non-RoHS) Termination Insensitive
The unique design of the termination insensitive
mixer (TIM) enables it to apply high reverse voltage
to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with
minimum distortion. In addition the TIM has internal
loads that provide a good match and also absorb
mixer generated LO frequency terms. Combined,
these features give the mixer its insensitivity to
external mismatches, plus superior VSWR.
Features
- Intermodulation Ratio is Insensitive to Port Mismatches
- MIL-STD-883 Screening Available
- Lo Power: +24 dBm Max
- Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C
- Impedance: 50 Ohms Nominal
- Isolation: 35 dB Typical Midband
- VSWR: <2.0:1 Typical Midband
Applications
- Aerospace and Defense
- ISM
Specifications
- Min Frequency, RF/LO: 1 MHz
- Min Frequency, IF: 1 MHz
- Input P1dB: 7 dBm
- LO Drive: 10 dBm
- Conversion Loss: 10 dB
- Isolation LO-RF: 35 dB
- Max Frequency, RF/LO: 3,500 MHz
- Max Frequency, IF: 3,500 MHz
- Max Frequency, IF: 3,500 MHz
Datasheet
Package
- C-7
Package Category
- Connectorized
Recently Viewed
- No Recent Parts found!
Technical Resources
Resources
Get Support
Customer Support
Technical Applications Support
Recent Searches
Products
- RF Power Amplifiers >5W
- Optical Networking ICs
- Optical Components
- Amplifiers
- Diodes
- KV CAPS
- Network Connectivity Solutions
- Crosspoints and Signal Conditioners
- Frequency Conversion
- Control Products
- Passives
- SDI Products
- Frequency Generation
- Multifunction ICs & Modules
- HDcctv Devices
- Communications Processors
